Polyester Single Jersey

Weight	120–200 g/m²
Composition	100% polyester (PES); combed/ring yarn by quality, recycled (rPET) version available.
Knit type	Single jersey · Single Jersey
Use class	Everyday
Stretch	Mechanical stretch
Knit	Single-feed, single-bed circular knit; a flat face and a loop-back reverse.
Hand	Light, fine and fluid; smooth face, lightly textured back; soft, low stretch.
Typical use	T-shirts · innerwear · jerseys
Strength	The economical single-face base — light, fast-drying and the best surface for sublimation.
Watch for	Single-face edges curl; opacity is weak at low weights.

CertificationsISO 9001ISO 14001ISO 45001OEKO-TEX STePSTANDARD 100GRS · RCS

Width, gauge, finishing options and test standards are shared on request.

Typical technical ranges

Weight tolerance	±5% (typical); on light/fine jersey (≤150 g/m²) practically ±5–7%
Width	Open width 150–200 cm; tubular 70–110 cm (varies with machine diameter/inches and gsm)
Shrinkage (wash)	After-wash length/width −3% … −7% (typical after heat-set; length usually higher); higher if not set / high-twist yarn
Color fastness	Wash 4–5; rubbing dry 4–5, wet 3–4; light 4–6 (lower bound on deep/bright and pale shades); perspiration (acid/alkaline) typically 4–5
Abrasion / pilling	Martindale ~20,000–40,000 cycles (smooth jersey, end-use dependent); pilling 3–4. Brushed/raised variants (fleece) more prone
Gauge / yarn	Machine gauge ~E20–E28 (fine sport jersey E28–E32); yarn typically 75–150 den PES filament (DTY), 50–75 den on fine gauge, heavy jersey 150–300 den

These ranges are industry-TYPICAL / indicative values based on construction and fiber, not Fersan's binding QC measurements. Exact values are confirmed per order, approved sample and lot-based QC report.

Request a sample of this fabric All products

Fersan Tekstil · www.fersantekstil.com · (0212) 875 43 13