Home / Fabrics / Polyester French Terry with Elastane
TECHNICAL DATA SHEET

Polyester French Terry with Elastane

Weight210–320 g/m²
Composition~93–97% polyester / 3–7% elastane (spandex); most often ~95/5. Cotton-PES-elastane tri-blends also exist.
Knit typeStretch French terry + elastane · French Terry
Use classSport
Stretch2-way stretch
KnitElastane added to the loop-back knit (usually fed every course); ground, loop and elastane knit together.
HandFlat face / looped back; with elastane more elastic, body-hugging and recovering; good recovery.
Typical useActive/slim sweats-hoodies · stretch joggers · athleisure
StrengthElastane adds body-hugging stretch and shape retention to French terry — less bagging at knee/elbow.
Watch forElastane can degrade with heat/chlorine; wrong wash/dry reduces stretch; mostly 2-way.
CertificationsISO 9001ISO 14001ISO 45001OEKO-TEX STePSTANDARD 100GRS · RCS

Width, gauge, finishing options and test standards are shared on request.

Typical technical ranges

Weight tolerance±5% (±6–7% on heavy/brushed variants)
WidthOpen width typ. 150–200 cm; tubular typ. 70–100 cm (half-circumference). Varies with cylinder diameter (30–34″)/gauge and finished-width setting
Shrinkage (wash)After-wash dimensional change typ. width −3 to −7%, length −3 to −7% (heat-set + compacting pulls toward the lower end; predominantly shrinkage direction). No hygroscopic shrink in 100% PES; looped-back relaxation can run slightly above plain jersey
Color fastnessWash 4–5; rubbing dry 4–5, wet 3–4; light 4–6 (deep/bright and turquoise/navy shades may drop wet-rub to 2–3 and light to the lower end). Typical for disperse-dyed PES
Abrasion / pillingMartindale abrasion typ. 20,000–40,000+ cycles; pilling ISO 12945 grade 3–4 (looped-back floats make it slightly more pill-prone than flat jersey; brushed variant can drop to 2–3)
Gauge / yarnMachine gauge typ. E18–E24 (medium); feed yarn typ. 75–150 denier PES filament (150–300 denier on heavy variants). Finer/sporty toward E24, heavy sweat-fabric toward E18

These ranges are industry-TYPICAL / indicative values based on construction and fiber, not Fersan's binding QC measurements. Exact values are confirmed per order, approved sample and lot-based QC report.

Related reading: Fleece and Scuba: Structured Polyester Knits · Brushed, Unbrushed and Fleece: Where Warmth Comes From in Polyester Knits

Fersan Tekstil · www.fersantekstil.com · (0212) 875 43 13