Home / Fabrics / Brushed (Fleece-Backed) Polyester French Terry
TECHNICAL DATA SHEET

Brushed (Fleece-Backed) Polyester French Terry

Weight240–360 g/m²
Composition100% polyester; the thick loop yarn on the reverse is brushed/napped. Cotton-PES brushed terry is also common.
Knit typeBrushed-back French terry · French Terry
Use classOuter / structured
StretchMechanical stretch
KnitThe reverse of a two-thread loop-back is brushed (raised); the loops open into a soft, fleece-like back.
HandFlat face; napped, soft, warm fleece-like back; fuller and loftier.
Typical useWinter sweatshirts · brushed hoodies · fleece-backed joggers · loungewear
StrengthA brushed back delivers clear softness and warmth without adding much weight.
Watch forThe napped surface can flatten/pill over time; polyester pile may pill more visibly than cotton.
CertificationsISO 9001ISO 14001ISO 45001OEKO-TEX STePSTANDARD 100GRS · RCS

Width, gauge, finishing options and test standards are shared on request.

Typical technical ranges

Weight tolerance±5% (±6–7% on heavy/brushed variants)
WidthOpen width typ. 150–200 cm; tubular typ. 70–100 cm (half-circumference). Varies with cylinder diameter (30–34″)/gauge and finished-width setting
Shrinkage (wash)After-wash dimensional change typ. width −3 to −7%, length −3 to −7% (heat-set + compacting pulls toward the lower end; predominantly shrinkage direction). No hygroscopic shrink in 100% PES; looped-back relaxation can run slightly above plain jersey
Color fastnessWash 4–5; rubbing dry 4–5, wet 3–4; light 4–6 (deep/bright and turquoise/navy shades may drop wet-rub to 2–3 and light to the lower end). Typical for disperse-dyed PES
Abrasion / pillingMartindale abrasion typ. 20,000–40,000+ cycles; pilling ISO 12945 grade 3–4 (looped-back floats make it slightly more pill-prone than flat jersey; brushed variant can drop to 2–3)
Gauge / yarnMachine gauge typ. E18–E24 (medium); feed yarn typ. 75–150 denier PES filament (150–300 denier on heavy variants). Finer/sporty toward E24, heavy sweat-fabric toward E18

These ranges are industry-TYPICAL / indicative values based on construction and fiber, not Fersan's binding QC measurements. Exact values are confirmed per order, approved sample and lot-based QC report.

Related reading: Fleece and Scuba: Structured Polyester Knits · Brushed, Unbrushed and Fleece: Where Warmth Comes From in Polyester Knits

Fersan Tekstil · www.fersantekstil.com · (0212) 875 43 13