TECHNICAL DATA SHEET
Anti-Pill Fleece
| Weight | 200–340 g/m² |
|---|---|
| Composition | 100% polyester; standard fleece + an anti-pill (anti-pilling) surface finish. |
| Knit type | Anti-pill fleece · Polar Fleece |
| Use class | Outer / structured |
| Stretch | Mechanical stretch |
| Knit | On the raised, sheared fleece ground, an anti-pill treatment / singe-shear (often one-sided) fixes the nap tips. |
| Hand | Soft napped like standard fleece; the surface stays smoother/more even and dulls less with use. |
| Typical use | Frequently-washed fleece jackets/tops · kidswear · corporate/promo fleece · blankets |
| Strength | Keeps standard fleece’s warmth while staying smooth and pill-free even after many washes and abrasion. |
| Watch for | Anti-pill is a finish, not absolute; some pilling can still appear under very aggressive use; durability depends on application quality. |
CertificationsISO 9001ISO 14001ISO 45001OEKO-TEX STePSTANDARD 100GRS · RCS
Width, gauge, finishing options and test standards are shared on request.
Typical technical ranges
| Weight tolerance | ±5% (typical); on raised/napped fleece ±5–7% is more realistic, up to ±7% on light micro-fleece |
|---|---|
| Width | Open width ~150–190 cm (typically 160–180); tubular ~70–95 cm. Varies with machine diameter/cut, weight and stenter draw |
| Shrinkage (wash) | Length/width ~±2–4% (typical after proper heat-set); may reach ~5% in length if setting/finishing is weak. A ≤±3% target is common |
| Color fastness | Wash 4–5; rubbing (dry) 4–5, (wet) 3–4; light 4–6 (typical disperse-dyed PES). Minimum ~4 targeted; wet rub drops to the low end on deep/bright shades |
| Abrasion / pilling | Pilling 2–3 (raw/unfinished) → 3–4 with anti-pill shearing/finish, up to 4 in good cases. Martindale abrasion is usually not reported for fleece; if reported, ~15,000–30,000 cycles order of magnitude (construction/yarn dependent) |
| Gauge / yarn | Machine gauge ~E18–E24 (typically E20–E22; heavy/lofty polar down to E16–E18); yarn typically 100–300 denier textured (DTY) PES (coarser denier or plied feed for nap/loft; ~75 denier microfilament on micro-fleece) |
These ranges are industry-TYPICAL / indicative values based on construction and fiber, not Fersan's binding QC measurements. Exact values are confirmed per order, approved sample and lot-based QC report.
Related reading: Fleece and Scuba: Structured Polyester Knits · Brushed, Unbrushed and Fleece: Where Warmth Comes From in Polyester Knits · The Weight Map: Which Knit Goes Where, from 80 to 400 g/m² · Thermophysiological Comfort: Ret, Rct and the Sweating Hot Plate
Fersan Tekstil · www.fersantekstil.com · (0212) 875 43 13